Magnum Energy - MS 4024-PAE 4000W 24V Pure Sine Wave Inverter 120/240VAC
Includes RC50 Remote
MS-AE 120/240V Series Inverter/Charger form Magnum Energy is a pure
sine wave inverter designed specifically for the most demanding
renewable energy applications. The MS-AE Series is powerful,
easy-to-use, and best of all, cost effective.
stacking required: The unique design of the MS-AE Series can provide
120/240 volt output in one unit, eliminating the need to stack two units
together to get 240 volts.
Factor Corrected (PFC) Charger: Our PFC charger is built into all of
our inverter chargers. It uses less energy from a generator than a
standard charger - using 25 to 30% less AC current than standard
and Reliable: The MS-AE Series is ETL listed to the stringent
requirements of UL 1741 and CSA STD C22.2 No.107.1-01 for renewable
the MS-AE Series in four easy steps: Simply connect the inverter's
output to your distribution circuits or electrical panel, connect your
power cable (AC) to the inverter's easy-to-reach terminal block, connect
the batteries, and switch on the power.You asked and Magnum listened.
sine wave Power your T.V.s, stereos, plasma screens, and other
sensitive electronics without worry. The pure sine wave inverter and
power factor corrected charger provide clean, reliable inverter power
with low total harmonic distortion (THD) of less than 5%.
You asked and Magnum listened.
Pure sine wave Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
Efficient: The sine wave charger efficiently charges your batteries even at low AC voltage, while the modified sine wave inverter keeps the cost down. Additionally, the battery temperature sensor works with the charger for optimum battery charging.
Choices: The MS-AE Series comes in 24 and 48 volt configuration, allowing you to choose the model that is right for you.
Versatile mounting: Mount the MS-AE Series on a shelf, wall.
Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
Multiple ports: The MS-AE Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
Accessible design: The extra large AC access cover with terminal screw block and 360 degree DC connection terminals with covers make this inverter more accessible when it needs to be.
Convenient switches: The MS-AE Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
Expanded transfer relay: Two legs at 30A per leg transfer service is standard on all models.
Buy with ease: The MA-AE Series is backed by a 24 month limited warranty.
- Battery Monitor Kit
- DC Load Disconnect
- Remote Control
Accessories and Options:
- Remote Control: For convenient finger-tip operation, including the new one-knob programming.
- AGS module: Automatically starts and stops your generator based on temperature or battery voltage.
Input battery voltage: 18.0 to 33.8 VDC
Nominal AC output voltage: 120/240 VAC split phase
Output frequency and accuracy: 60 Hz +- 0.04%
Total Harmonic Distortion (THD): <5%
1 msec surge current (amps AC): Line-Neutral: 120, Line-Line 195
100 msec surge current (amps AC): Line-Neutral: 72, Line-Line 92
5 sec surge power (real watts): 5800
30 sec surge power (real watts): 5200
5 min surge power (real watts): 4800
30 min surge power (real watts): 4500
Continuous power output at 25C: 4000 VA
Rated input battery current: 105 ADC
Inverter efficiency (peak): 93%
Transfer time: 16 msecs
Search Mode: < 6 watts
No Load (120 VAC output): 27 watts
Waveform: Pure Sine Wave
Continuous output at 25°C: 105 ADC
Charger efficiency: 85%
Power factor: > 0.95
Input current at rated output (AC amps): 15 AAC per leg at 120/240 VAC split phase
Dimensions (LWH): 13.75" x 12.65" x 8.0" (34.9 x 32.1 x 20.3 cm)
Mounting: Shelf or wall (no vents on bottom)
Weight: 54.5 lbs (24.7 kg)
Max operating altitude: 15,000' / 4570 m
Operating temperature: -20°C to 60°C (-4°F to 140°F)
Non-operating temperature: -40°C to 70°C (-40°F to 158°F)
Operating humidity: 0 to 95% RH non condensing
General Features and Capabilities
Transfer relay capability: 2 leg at 30A per leg transfer standard on all models
Five stage charging capability: Bulk, Absorb, Float, Equalize (requires remote), and Battery Savertm
Battery temperature compensation: With available temp sensor (battery temp 0 to 50C)
Internal cooling: 0 to 120 cfm variable speed drive using dual 92 mm brushless DC fans
Over current protection: Yes, with two overlapping circuits
Over temperature protection: Yes on transformer, MOSFETS, and battery
Conformal coating on PCB's for corrosion protection: Yes
Powder coated chassis & top for corrosion protection: Yes
Stainless steel fasteners for corrosion protection: Yes
Listings: ETL listed to UL 1741 and CSA STD C22.2 No. 107.1-01
Warranty: Two years