 |
 |
 |
 |
Manufacturer: Midnite Solar Manufacturer Part#: CLASSIC200The Classic is the only MPPT charge controller that has Arc Fault Detection, making this controller the safest controller available. The Midnite Solar Classic lines of MPPT charge controllers will substantially increase the flexibility, features and range currently found on MPPT controllers. The MidNite Classic charge controller is unique in its ability to be used for a great variety of DC input sources. The Classic is designed to regulate DC input from PV, and Approved Hydro and Wind turbines. The Classic 150, 200 and 250 are designed to work with 12, 24, 36, 48, 60 and 72 volt battery banks. With the Classic 150 ranging up to 96 amps, the Classic 200, 79 amps and the Classic 250, 63 amps, why would you need any other controller? MidNite Solar has doubled its factory floor space for production of the Classic line of charge controllers, making the Classic the only real "Made in America" charge controller. The Classic standard models are the only MPPT controllers with built-in Arc Fault Detection, making them the safest controllers available. 



Midnite Solar Classic 200
MPPT Charge Controllers
The Classic is the only MPPT charge
controller that has Arc Fault Detection, making this controller the
safest controller available.
The Midnite Solar Classic lines of MPPT charge controllers
will substantially increase the flexibility, features and range
currently found on MPPT controllers. The MidNite Classic charge
controller is unique in its ability to be used for a great variety of DC
input sources. The Classic is designed to regulate DC input from PV,
and Approved Hydro and Wind turbines. The Classic 150, 200 and 250 are
designed to work with 12, 24, 36, 48, 60 and 72 volt battery banks. With
the Classic 150 ranging up to 96 amps, the Classic 200, 79 amps and the
Classic 250, 63 amps, why would you need any other controller? MidNite
Solar has doubled its factory floor space for production of the Classic
line of charge controllers, making the Classic the only real "Made in America"
charge controller. The Classic standard models are the only MPPT
controllers with built-in Arc Fault Detection, making them the safest
controllers available.
Features
- 200 .
- 12-72V battery charging standard
- Built in DC-GFP and Arc Fault Detector
- Battery temperature sensor is included
- Solar, wind and hydro MPPT modes
- Ethernet, USB and RS232
- Remote and local displays possible
- 32 MB of data logging
- Set up Wizard with voice help screens coming soon.
- Wizard walks you through:
- Battery hook up
- PV array sizing and hook up
- Wind turbine program selection
- Wire sizing
- Breaker selection
- PV combiner selection
- Sunrise and sunset program set up
- Voltage drop calculations
The lines on the graph represent the Classic output current at different Max Power Points Voltage (not VOC). To estimate the Max Power Point of your system; first you have to find out the VOC of the Photovoltaic strings connected to the Classic. For example If 5 Modules in series in one string and STC VOC rating is 36.6V, then the VOC of the string equals: 5(modules) * 36.6v(STC VOC) = 183V.
The rule of thumb says that the MPP will be around 80% of the string's VOC; 183v * 0.8 = 146.4v On the graph of the Classic model you have, the X axis represents the Battery Voltage and the Y axis is the Output current. Knowing that, go to the corresponding graph and look for the a line close to your system's MPP voltage and you can then determine the max output power for your system design.
 
Thank you for submitting your request.
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Specifications & Documents

|
|
 |
 |
 |
 |

|