MidNite Solar Classic 250 SL

Home > Charge Controllers >

Alternative Views:

Our Price: $699.00

Manufacturer: Midnite Solar
Manufacturer Part#: 250SL

Quantity in Stock: Call to Order
Product Code: MNSCL250SL

Qty:

Product Features

Manufacturer: Midnite Solar
Manufacturer Part#: 250SL

The Classic SL-250 MPPT Charge Controller is a simplified SOLAR ONLY version of the Classic 250 with streamlined menus. The Classic SL-250 has a graphics panel and ground fault but no arc fault or Ethernet capabilities. The Classic SL-250 has a maximum output current of 63 amps, an operating voltage of 250 volts and works with 12 to 72 volt battery systems. As with the whole Classic line, the Classic 250-SL has MidNite’s exclusive HyperVOC which extends VOC limits when needed. With a streamlined menu, these SOLAR only MPPT charge controllers are easy to setup and a breeze to install!

The lines on the graph represent the Classic output current at different Max Power Points Voltage (not VOC). To estimate the Max Power Point of your system; first you have to find out the VOC of the Photovoltaic strings connected to the Classic. For example If 5 Modules in series in one string and STC VOC rating is 36.6V, then the VOC of the string equals: 5(modules) * 36.6v(STC VOC) = 183V.

The rule of thumb says that the MPP will be around 80% of the string's VOC; 183v * 0.8 = 146.4v On the graph of the Classic model you have, the X axis represents the Battery Voltage and the Y axis is the Output current. Knowing that, go to the corresponding graph and look for the a line close to your system's MPP voltage and you can then determine the max output power for your system design.

Specifications & Documents

Share your knowledge of this product. Be the first to write a review »