Home > Equipment Manufacturers > Quick Mount Roof Flashing >

Quick Mount Classic Composition Mount
Quick Mount Classic Composition Mount


 
Alternative Views:


Our Price: $18.00

Product Code: QMSC
Qty:

Product Features Contact Us
 
The Classic Comp, the industry's best-selling solar panel mount for rooftop solar installations of PV and solar water heating systems, uses our patented QBlock Elevated Water Seal technology to ensure a long, watertight life on composition/asphalt shingle roofs. The Classic Comp was also designed to install fast, with just a single bolt. It is backed by solid engineering and certified for strength and waterproofing by the ICC-ES. The Classic Composition Mount is the most universally code-compliant mount available for composition/asphalt shingle roofs.

Features

  • Stainless steel hardware (included)
  • 20-year warranty; 50-year expected life
  • Works with all leading racks
  • Won't void roof manufacturer's warranty
  • Approved for use by leading roof manufacturers
  • Meets or exceeds roofing industry best practices
  • 2554 lbs. average ultimate pullout (Douglas fir); 2203 lbs. average ultimate shear
  • ICC-ES certified
  • One bolt installation
  • No shingle cutting
  • 100% IBC compliant
  • Patent numbers 7,762,027 & 7,895,808
  • Made in USA

The 12 x 12-inch Classic Composition Mount flashing is designed to fit within a standard 5 to 5.625" course and the exposed course should be no greater than 5.75". If the exposure is greater than this, use the Classic Shake Mount as an alternative. There's no shingle cutting and no shingle distortion caused by trying to force a fit.

Product Specifications

Each mount kit (12 per box) includes:

  • Cast aluminum mounting block (2-1/4" L x 1-1/4" W x 1-1/4" H) bonded with .05" thick, 12" x 12" aluminum flashing
  • Hanger bolt, 5/16" x 6" (1-1/4" machine, 1-3/4" shank, 3" lag)
  • Stainless steel and EPDM rubber sealing washer, 3/4" x 5/16"
  • Two 5/16" hex nuts
  • EPDM sealing washer with 60 Durometer hardness
  • Stainless steel flat washer, 1" x 5/16"
Flashing size: 12" x 12"
Pullout/shear: 2554 lbs. average ultimate pullout (Douglas fir); 2203 lbs. average ultimate shear.
Tools needed for installation:
  • Tape measure
  • Roofer's bar/shingle ripper
  • Chalk line
  • Stud finder
  • Caulking gun
  • Sealant compatible with roofing materials
  • Drill with 7/32" long-style bit
  • Drill or impact gun with 1/2" deep socket
Applicable roof types: Standard and high-definition composition/asphalt and wood shingle roofs with 5" to 5-5/8" courses
Available finishes:
  • Aluminum mill
  • Bronze anodized
Specifications & Documents
Resources

Share your knowledge of this product. Be the first to write a review »