Home > Equipment Manufacturers > Quick Mount Roof Flashing >

Quick Mount E-Mount Lag
Quick Mount E-Mount Lag

Alternative Views:

Quantity in Stock: Call to Order
Product Code: QMSELAG

Product Features Contact Us
E-Mount Lag uses the patented QBlock Elevated Water Seal technology to provide superior waterproofing on composition/asphalt shingle roofs. Priced at a modest premium over commodity roof mounts, E-Mount Lag makes it possible to deliver Quick Mount PV quality even on price-sensitive jobs. It is backed by solid engineering and certified for strength and waterproofing by the ICC-ES. All stainless steel hardware included for fast, single bolt installation. 20-year limited product warranty.

  • Patented Elevated Water Seal
  • Stainless steel hardware (included)
  • All-aluminum 12" x 12" flashing
  • Won't void roof manufacturer's warranty
  • 20-year warranty; 50-year expected life
  • Meets or exceeds roofing industry best practices
  • Available through leading distributors
  • ICC-ES certified
  • Works with all leading racks
  • Fast, simple lag bolt installation
  • No shingle cutting
  • 100% IBC compliant
  • Patent numbers 7,762,027 & 7,895,808
  • Made in USA

The 9 x 12-inch E-Mount Lag flashing is designed to fit within a standard 5 to 5.625" course and the exposed course should be no greater than 5.75". If the exposure is greater than this, use the Classic Shake Mount as an alternative. There's no shingle cutting and no shingle distortion caused by trying to force a fit.

Technical Specifications

Each mount kit (12 per box) includes:
Cast aluminum mounting block (2-1/4" L x 1-1/4" W x 1-1/4" H) bonded with .04" thick, 9" x 12" aluminum flashing
EPDM sealing plug, 5/16" x 7/8"
Hex-head lag screw, 5/16" x 5-1/2"
Fender washer, 5/16" x 1-1/4"
Flashing size: 9" x 12"
Pullout/shear: 2197 lbs. average ultimate pullout (Douglas fir); 1578 lbs. average ultimate shear
Tools needed for installation:
Tape measure
Roofer's bar/shingle ripper
Chalk line
Stud finder
Caulking gun
Sealant compatible with roofing materials
Drill with 7/32" long-style bit
Drill or impact gun with 1/2" socket
Applicable roof types: Standard and high-definition composition/asphalt and wood shingle roofs with 5" to 5-5/8" courses
Available finish: Aluminum mill Bronze Anodized

Share your knowledge of this product. Be the first to write a review »