Skip to content
Conext * Schneider Electric
2 AWG Battery Cable
2/0 Battery Cable
4/0 Battery Cable
Packages & Kits
Pre Wired Equipment Boards
Battery Bank Disconnects
Small Breaker Boxes
RV & Marine
Rail Mounting Systems
Pole Mounting Systems
Power Usage Meter
Go Power Mobile
Kill A Watt Meter
Magnum Energy Controllers
Midnite Solar Controllers
MT Solar Mounting
Outback Power Controllers
Quick Mount Roof Flashing
Midnite Solar Combiner Boxes
Outback Power Combiner Boxes
Flex - A - Prene
Go Power Carmanah
Blue Sea Battery
Quick Mount Roof Flashing
Quick Mount QBase Specialty Flat Tile Mount
Quantity in Stock:
Call to Order
Quick Mount PV's Specialty Flat Tile Mount dramatically reduces the time and effort needed to double flash flat tile roof penetrations. For flashing at the tile level, we've pre-fabricated an aluminum "tile" designed to drop directly into a standard 12" x 17" flat tile roof. Just replace the tile; there's no tile drilling or cutting. Some mounts will require attachment to blocking where rafter does not align with center.
Works with all standard concrete tile roofs
Flashed at both the deck and top level
Meets or exceeds tile roofing best practices
All fasteners and hardware included
All exposed hardware is stainless steel
20-year warranty; 50-year expected life
Available through leading
100% IBC compliant
No tile cutting, no tile drilling
Works with all leading racks
Patent number 7,861,485
Made in USA
The aluminum subflashing is sized for easy code compliance, and molded to fit snugly over the mounting plate and removable standoff. Use standard roofing methods at the deck – bibbing or 3-coursing, for instance – to seal off rain from the penetrations and fasteners. All exposed components are aluminum, stainless steel or EPDM rubber to help keep penetrations watertight for the life of the PV system and most roofs.
Each mount kit (12 per box) includes:
Cast aluminum base plate, 5-1/2" x 3-1/2" x 1/2"
9" x 9" spun aluminum subflashing
12" x 17" fitted aluminum top flashing
1-1/4" x 5-1/2" extruded aluminum extender post
Grade-8 bolt, 5/16" x 3/4"
Stainless steel bolt, 5/16" x 1"
Four zinc-coated steel lag bolts, 1/4" x 1-1/2"
EPDM rubber counter flash
Sealing washer, 5/16" x 1-1/4"
Stainless steel split lock washer, 5/16''
Fender washer, 5/16"
12"(W) x 17"(L)
Tools needed for installation:
Roofer's bar/shingle ripper
Sealant compatible with roofing materials
Drill with 1/4" bit
Drill or impact gun with 1/2" deep socket
Applicable roof types:
QBase Universal Tile Mount
, omitting instructions to bend the top flashing.
Thank you for submitting your request.
Specifications & Documents
Quick Mount E-Mount
Quick Mount Classic Composition Mount
Quick Mount Quick Rack QBase Shake & Slate Mount
Quick Mount E-Mount Lag
Quick Mount Classic Conduit Shake Mount
Quick Mount Quick Rack Classic Conduit Mount
Quick Mount Rail-Free Mounting System
Quick Mount Quick Hook® For Bottom Mount Rails
Share your knowledge of this product.
Be the first to write a review »