Home > Equipment Manufacturers > Quick Mount Roof Flashing >

Quick Mount QBase Standard Flat Tile Mount
Quick Mount QBase Standard Flat Tile Mount

Alternative Views:

Quantity in Stock: Call to Order
Product Code: QMSFT

Product Features Contact Us
The QBase Universal Tile Mount uses the QBase foundation and two spun aluminum cone flashings for installing solar panels on tile roofs with superior strength and waterproofing. The installer can conform the secondary top flashing to fit virtually any roof tile, flat or curved.

  • Flashed at both the deck and top level
  • QBase is the strongest off-the-shelf mechanical mount
  • 3031 lbs. average ultimate pullout (Douglas fir); 803 lbs. average ultimate shear
  • 18x18-inch top flashing with spun aluminum cone
  • 9x9-inch subflashing with spun aluminum cone
  • All exposed hardware is 18-8 stainless steel
  • Attaches to roof structure with 2 or 4 fasteners
  • Meets or exceeds tile roofing best practices
  • Available through leading distributors
  • 100% IBC compliant
  • All fasteners and hardware included
  • 20-year warranty; 50-year expected life
  • Works with all leading racks
  • Patents pending
  • Made in USA

The subflashing at the roof deck forms a waterproof shield isolating all penetrating fasteners from water intrusion. Both flashings feature a spun aluminum cone, with no seams to fail in extreme climates. The reinforced QBase makes an extraordinarily strong foundation. Ideal for both retrofit and new roof installations.

Technical Specifications
Each mount kit (12 per box) includes:
Cast aluminum QBase
Aluminum post, 1-1/4'' x 4-1/2''
9'' x 9'' spun aluminum cone subflashing
18'' x 18'' spun aluminum cone malleable flashing
Two zinc-coated steel lag bolts, 5/16'' x 3''
Stainless steel machine bolt, 5/16" x 1"
EPDM post collar/counter flash
EPDM-bonded stainless steel sealing washer, 5/16'' x 1-1/4''
Stainless steel fender washer
Stainless steel split lock washer, 5/16''
Grade-8 machine bolt, 5/16'' x 3/4''
Flashing Size: 18" x 18" top flashing; 9" x 9" subflashing
3031 lbs. average ultimate pullout (Douglas fir); 803 lbs. average ultimate shear
Tools needed for installation:
Tape measure
Drill with 7/32" wood bit
Ratchet with 1/2" socket
Caulking gun
One tube of sealant compatible with roofing materials
30 lb felt paper
Whisk broom or vacuum
Roofer's bar or shingle ripper
Applicable roof types: All flat tile roofs
Available Finishes:
Aluminum mill Bronze anodized

Specifications & Documents
CAD Drawing
Install Guide

Share your knowledge of this product. Be the first to write a review »