Skip to content
Conext * Schneider Electric
2 AWG Battery Cable
2/0 Battery Cable
4/0 Battery Cable
Packages & Kits
Pre Wired Equipment Boards
Battery Bank Disconnects
Small Breaker Boxes
RV & Marine
Rail Mounting Systems
Pole Mounting Systems
Power Usage Meter
Go Power Mobile
Kill A Watt Meter
Magnum Energy Controllers
Midnite Solar Controllers
MT Solar Mounting
Outback Power Controllers
Quick Mount Roof Flashing
Midnite Solar Combiner Boxes
Outback Power Combiner Boxes
Flex - A - Prene
Go Power Carmanah
Blue Sea Battery
Quick Mount Roof Flashing
Quick Mount QBase Universal Tile Mount
Quantity in Stock:
Call to Order
The QBase Universal Tile Mount uses the QBase foundation and two spun aluminum cone flashings for installing solar panels on tile roofs wit
superior strength and waterproofing. The installer can conform the secon
dary top flashing to fit virtually any roof tile, flat or curved.
Flashed at both the deck and top levels
18x18-inch malleable top flashing with spun aluminum cone
9x9-inch subflashing with spun aluminum cone
QBase is the strongest off-the-shelf mechanical mount
3031 lbs. average ultimate pullout (Douglas fir); 803 lbs. average ultimate shear
All exposed hardware is 18-8 stainless steel
Attaches to roof structure with 2 or 4 fasteners
Meets or exceeds tile roofing best practices
Available through leading
100% IBC compliant
All fasteners and hardware included
20-year warranty; 50-year expected life
Works with all leading racks
Made in USA
The primary flashing at the roof deck forms a waterproof shield isolating all penetrating fasteners from water intrusion. The top flashing is malleable, so it works equally well for curved and flat tile roofs. Both flashings feature a spun aluminum cone, with no seams to fail in extreme climates. The reinforced QBase makes an extraordinarily strong foundation. Ideal for both retrofit and new roof solar panel installations.
Cast aluminum QBase
Aluminum post, 1-1/4'' x 6-1/2''
9'' x 9'' spun aluminum cone subflashing
18'' x 18'' spun aluminum cone malleable flashing
Two zinc-coated steel lag bolts, 5/16'' x 3''
Stainless steel machine bolt, 5/16" x 1"
EPDM post collar/counter flash
EPDM-bonded stainless steel sealing washer, 5/16'' x 1-1/4''
Stainless steel fender washer
Stainless steel split lock washer, 5/16''
Grade-8 machine bolt, 5/16'' x 3/4''
18" x 18" top flashing; 9" x 9" subflashing
3031 lbs. average ultimate pullout (Douglas fir); 803 lbs. average ultimate shea
Tools needed for installation:
Drill with 7/32" wood bit
Ratchet with 1/2" socket
One tube of sealant compatible with roofing materials
30 lb felt paper
Whisk broom or vacuum
Roofer's bar or shingle ripper
Applicable roof types
All tile roofs, curved or flat
Thank you for submitting your request.
Specifications & Documents
Quick Mount QBase Low Slope Mount
Quick Mount Quick Rack QBase Shake & Slate Mount
Quick Mount QBase Specialty Flat Tile Mount
Quick Mount Classic Composition Mount
Quick Mount Conduit Penetration Flashing for Curved & Flat Tile Roofs
Quick Mount E-Mount
Quick Mount Quick Rack Classic Shake Mount
Quick Mount QBase Standard Flat Tile Mount
Share your knowledge of this product.
Be the first to write a review »