Home > Equipment Manufacturers > Quick Mount Roof Flashing >

Quick Mount QBase Low Slope Mount
Quick Mount QBase Low Slope Mount


 
Alternative Views:



Quantity in Stock: Call to Order
Product Code: QMLSH
Qty:

Product Features Technical Specs Contact Us
 
Quick Mount PV's QBase Low Slope Mount takes the traditional base-and-post PV mount to its ultimate level. It's the strongest you can buy for mechanically attaching commercial solar systems to TPO, PVC, EPDM, built-up asphalt, and virtually all other non-metal low-slope roofs (aka 'flat roofs') used in commercial roofing.

Features

  • Code compliant for all non-metal low slope roofs
  • QBase is the strongest off-the-shelf mechanical mount
  • All exposed hardware is 18-8 stainless steel
  • 3 post heights offer 7", 9" and 12" clearance off the deck
  • Attaches to roof with 2 or 4 fasteners
  • 20-year warranty; 50-year expected life
  • Meets or exceeds roofing industry best practices
  • All fasteners and hardware included
  • Available through leading distributors
  • 100% IBC compliant
  • Works with all leading racks
  • Great for solar hot water
  • Patents pending
  • Made in USA

How to Flash

Properly flashing penetrations in PVC, TPO and other membrane-type roofing requires the use of manufacturer-specific materials to ensure the flashing bonds chemically with the field membrane (ask your roofing supplier). For built up asphalt roofs (BUR) and other bituminous and modified bitumen roofs, aluminum flashings are available from Quick Mount PV in 4" and 8" tall cones (sold separately).


Technical Specifications

Each mount kit (12 per box) includes:

Cast aluminum QBase
Two zinc-coated steel lag bolts, 5/16" x 3"
Aluminum post, 1.25" x 6.5", 8.5" or 11.5"
EPDM-bonded stainless steel sealing washer, 5/16" x 1-1/4"
Stainless steel machine bolt, 5/16" x 1"
Stainless steel fender washer, 5/16" x 1"
Stainless steel split lock washer, 5/16"
Grade-8 machine bolt, 5/16'' x 3/4''
Flashing Size: Aluminum flashings (for built-up roof types only) are available from Quick Mount PV in 4" and 8" tall cones (sold separately).
Tools needed for installation:
Tape measure
Chalk line
Caulking gun
Roofing-compatible flashing and related waterproofing materials
Drill with 1/4" bit
Drill or impact gun with 1/2" deep socket

Applicable roof types: TPO, PVC, EPDM; built-up asphalt, bituminous and modified bitumen; virtually all other non-metal low slope roofs
Available finish:
Aluminum mill Bronze Anodized

Specifications & Documents
CAD Drawing
Resources
Installation Guide

Share your knowledge of this product. Be the first to write a review »