Skip to content
Conext * Schneider Electric
2 AWG Battery Cable
2/0 Battery Cable
4/0 Battery Cable
Packages & Kits
Pre Wired Equipment Boards
Battery Bank Disconnects
Small Breaker Boxes
RV & Marine
Rail Mounting Systems
Pole Mounting Systems
Power Usage Meter
Go Power Mobile
Kill A Watt Meter
Magnum Energy Controllers
Midnite Solar Controllers
MT Solar Mounting
Outback Power Controllers
Quick Mount Roof Flashing
Midnite Solar Combiner Boxes
Outback Power Combiner Boxes
Flex - A - Prene
Go Power Carmanah
Blue Sea Battery
Deltec Shunt 500 500AMP 50mV for all Meters
This is the standard industry current shunt as used in many high amper
Deltec manufactures the
majority of precision shunts in the US.
What is a shunt?
A shunt is just a very low resistance precision resistor that is wired in series with the load you want to measure. Essentially, it produces a small voltage that meters and monitors can read and convert to an Amp reading.
MKB-50-500: 500 amp, 50 mv (400 amps maximum)
500 amp-50 mV Shunt: For systems with maximum current 400 amps continuous with no overloads, or 300 amps continuous with
up to 5 minute overloads to 500 amps max. It allows amp readings as low as 0.1 amps. They are suitable for virtually all systems with moderate or large sized inverters. Size 31/4 by 13/4 inch base, 17/8 inches in height. These shunts are suitable for use with Trimetric, Xantrex, Blue Sky, and all other applications that require a precision 500 amp shunt. (Same as Blue Sky 506-0003-01).
The terminal blocks on the shunts are made of high quality bra
ss to allow proper heat dissipation and provide strong support for the entire shunt. The resistance blades are made from manganin shunt metal for it's low temperature co-efficient, long term stability and strength. The manganin strips are soldered into slots in the brass terminal blocks with high quality solder to provide a strong, lasting bond. Where mounting bases are provided, high strength phenolic is used with mounting holes designed in for ease of use.
Deltec DC Ammeter shunts are designed to provide the highest Quality Performance possible while maintaining their rugged construction characteristics. The shunts are designed and calibrated at the factory to have standard accuracy of ± 1/4%.
The MK series of shunts are manufactured to meet the stringent requirements of MILS161B military specifications.
Deltec MKB 500 amp shunt. 3.25" L x 1.75" W x 1.75" H 3/8"-16 terminals. 1.50" center to center on terminals.
Thank you for submitting your request.
DC Electrical Panel for Charge Controller and Inverter
Deltec Shunt 100A 100A Shunt 50mV for all Meters
SS-10L-12V, SunSaver 10 Amp 12V- LVD, Stock Universal Back Plate Assembly
Midnite Solar - Bus Bar Bus Bar 3.45 inches
Call To Order
DC Breaker 50 AMP 150VDC 120VAC
Midnite Solar MNSPD 300
OutBack Power FWBBUS
Midnite Solar 50 AMP - 300 VDC Din Rail Mount Breaker
Share your knowledge of this product.
Be the first to write a review »