Home > Iota Engineering >

Iota Engineering DLS-45 Power Converter/Battery Charger
Iota Engineering DLS-45  Power Converter/Battery Charger


 
Our Price: $208.00

Product Code: IOTA-DLS45
Qty:

Product Features Technical Specs Contact Us
 

This is an independent battery express charger. With this item you plug it into a standard 110/120 VAC outlet either from the power company or a secondary source like a generator. There are two connection points for a “POSITIVE” and “NEGATIVE” wire that you would attach to the battery posts on your battery bank. This item runs independent of any equipment you have – no special controllers or inverters need to match this item. The higher the “AMPERAGE” of this unit the faster it will charge your battery bank. Make sure you select the right voltage as they are available as 12V, 24V or 48V DC current.

The DLS-45 Power Converter/Battery Charger from IOTA Engineering converts nominal 108-132 AC voltage to 13.4 DC voltage for both DC load operation and 12V battery charging.

As a power supply, the unit's tightly controlled regulation allows the user to operate a nominal 12VDC load up to 45 amps.

As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-45 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells.

Features
Switch-mode technology
Exceptionally clean DC output
Tight line-load regulation
Quickly and efficiently charges batteries
Designed to withstand low transient AC line voltage
Current limit and thermal/overload protection
Lower operating temperature
Quiet fan operation
External reverse polarity fuse protection from incorrect battery connection
High and normal-stage charging jack
High and normal-stage charging jack

Specifications:
DC Output Voltage (No Load) approx. 13.6V (DC)
Output Voltage Tolerance (No Load) + or - .7%
Output Amperage, Max Continuous 15 Amps
Output Voltage (Full Load) approx. >13.4V (DC)
Maximum Power Output, Continuous 200 Watts
Ripple and Noise <50 mV rms
Input Voltage Range 108 - 132 AC
Input Voltage Frequency 47-63
Maximum AC Current (@108VAC) 3.7 Amps
Typical Efficiency >80%
Max Inrush Current, Single Cycle 30 Amps
Short Circuit Protection Yes
Overload Protection >100%
Line Regulation 100 mV rms
Load Regulation <1%
Fan Control* Proportional
Thermal Protection YES
Working Temperature Range 0° - 40° C
Storage Temperature -20° to 80° C
Withstand Voltage (VDC)** 1700/1700/500
Dimensions † 9.7″ x 6.7″ x 3.4″
Weight 4.5 lbs

Specifications & Documents
Installation Guide
Specifications
Warranty


Share your knowledge of this product. Be the first to write a review »