Home > Power Inverters >

Magnum Energy -Magnum ME2512 Inverter
Magnum Energy -Magnum ME2512 Inverter


 
Alternative Views:


Our Price: $1,479.00
Solar Penny Product Code: ME3112
Manufacturer: Magnum Energy
Manufacturer Part#: ME3112

Quantity in Stock: Call to Order

Product Code: ME3112


Class T Fuse Block:


Battery Cables:


Qty:  
Product Features Technical Specs Contact Us
 







Introducing the ME Series Inverter/Charger from Magnum Energy The ME Series is powerful and cost effective. A new generation inverter, it is designed specifically for rugged recreational vehicle use.

It is easy to use and very easy to install. Install the ME Series inverter in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter’s easy to reach terminal block, connect the batteries, and switch on the power.

Safe and reliable, these Magnum Energy inverters are ETL Listed to the stringent requirements of UL/cUL 458 for mobile use and UL 1741 for off grid installations.

  • Efficiency: The sine wave charger efficiently charges your batteries even at low AC voltage, while the modified sine wave inverter keeps the cost down. Additionally, the battery temperature sensor works with the charger for optimum battery charging.
  • Choices: The ME Series comes in three power models and 12 and 24 volt configurations, allowing you to choose the model that is right for you.
  • Upgradeable memory: The inverter is designed with Flash programming for easy memory upgrades.
  • Versatile mounting: Mount the ME Series on a shelf, bulkhead, or even upside down.
  • Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
  • Multiple ports: The ME Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
  • AC Access: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
  • Convenient switches: The ME Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
  • Expanded transfer relay: 50 Amp transfer service is available on all models.

Input battery voltage range: 9 - 16 VDC
Nominal AC output voltage: 120 VAC ± 5%
Output frequency and accuracy: 60 Hz ± 0.1 Hz
1 msec surge current (amps AC):
120
100 msec surge current (amps AC):
50
5 sec surge power (real watts): 6000
30 sec surge power (real watts): 4800
5 min surge power (real watts):3950
30 min surge power (real watts): 3500
Continuous power output at 45° C: 3100 VA
Maximum continuous input current: 413 ADC
Inverter efficiency (peak): 90%
Transfer time: 16 msecs
Search mode (typical): 5 Watt
No load (120 VAC output, typical): 25 watts
Waveform: Modified Sine Wave
Charger Specifications
Continuous output at 45° C: 160 ADC
Charger efficiency: 85%
Power factor: > .95
Input current at rated output (AC amps): 22


General Features and Capabilities:
Transfer relay capability: 2 legs at 30a for 120 V/30 A or 240 V/60 A service
Five stage charging capability: Bulk, Absorb, Float, Equalize,
and Battery Saver
Battery temperature compensation: with available temp sensor (battery temp 0 to 50C)
Remote inverter on/off witch: With available pigtail to connect to dry contact
Internal cooling: 0 to 120 cfm variable speed drive using dual 92 mm brushless DC fans
Over-current protection: Yes, with two overlapping circuits
Over-temperature protection: Yes on transformer, MOSFETS, and battery
Conformal coating on PCB's for corrosion protection: yes
Powder coated chassis and top for corrosion protection: yes
Stainless steel fasteners for corrosion protection: yes




Specifications & Documents
Specifications
Owner's Manuel
Website

Share your knowledge of this product. Be the first to write a review »