Skip to content
Conext * Schneider Electric
2 AWG Battery Cable
2/0 Battery Cable
4/0 Battery Cable
Packages & Kits
Pre Wired Equipment Boards
Battery Bank Disconnects
Small Breaker Boxes
RV & Marine
Rail Mounting Systems
Pole Mounting Systems
Power Usage Meter
Go Power Mobile
Kill A Watt Meter
Magnum Energy Controllers
Midnite Solar Controllers
MT Solar Mounting
Outback Power Controllers
Quick Mount Roof Flashing
Midnite Solar Combiner Boxes
Outback Power Combiner Boxes
Flex - A - Prene
Go Power Carmanah
Blue Sea Battery
Magnum Energy -MM1524AE 1200W 12V Modified Sine Wave Inverter 70A Charger
Call To Order
Solar Penny Product Code:
Quantity in Stock:
Call to Order
Class T Fuse Block:
Yes [Add $68.00]
Yes [Add $92.00]
The MM-AE Series Inverter/Charger for Renewable Energy Applications
is the cost effective solution for smaller power needs.
You asked and Magnum listened.
The MM-AE Series Inverter/Charger is loaded with features.
Standard transfer relay:
The standard 20 amp transfer relay will pass AC power through the inverter when using grid or generator power.
Versatile Mounting Mount the MM-AE Series on a shelf, bulkhead, or even upside down.
The MM-AE Series is fan cooled, enabling the unit to work well in confined spaces. If the inverter does exceed its temperature limits, it will automatically shut down and then restart when it cools down.
Low battery protection:
If your battery voltage reaches below the cut-out setting the MM-AE Series will automatically shut down.
High battery protection:
If your battery voltage reaches over the cut-out setting the MM-AE Series will automatically shut down.
Current overload protection:
The MM-AE Series will automatically shut down if its output wattage is exceeded or it detects a short in the wiring saving the unit from costly damage.
The MM-AE Series comes with an on/off front-mounted switch with an easy-to-read LED indicator.
Circuit breaker protection:
Every model comes with built in input and output circuit breakers for ease of installation
Battery temp sensor:
The standard battery temp sensor monitors temperatures from 0 to 50C
But with ease:
The MM-AE Series is backed by a two-year (24 month) parts and labor warranty.
Accessories and Options:
Remote Control: The optional ME-RC and MM-RC remotes are available for the MM-AE Series. A four wire phone jack comes standard with the unit to connect the remote.
Input battery voltage: 18 to 32 VDC
Nominal AC output voltage: 120 VAC +-5%
Output frequency and accuracy: 60 Hz +- 0.005%
1 msec surge current: 45 amps AC
100 msec surge current: 24 amps AC
5 sec surge power: 2650 real watts
10 sec surge power: 2575 real watts
30 sec surge power: 2500 real watts
5 min surge power: 2350 real watts
30 min surge power: 1900 real watts
Continuous power output at 25C: 1500 VA
Continuous current output at 25C (with 1.0 PF)
Rated input battery current: 70 ADC
Inverter efficiency: 91%
Transfer time: 16 msecs
Search Module: 0.12 ADC
No Load (120 VAC output): 0.63 amps DC
Waveform: Modified Sine Wave
Continuous output at 25C: 35 ADC
Charger efficiency: 88%
Power Factor: >0.95
Input current at rated output: 9 AC amps
General Features and Capabilities
Transfer relay capability: 20 amps AC (input current for charging and pass through)
Battery temperature compensation: Yes, standard temp sensor (battery temp 0 to 50C)
Remote available (optional): Yes, MM-RC, ME-RC
Internal cooling: 0 to 59 cfm variable speed
Over-current protection: Yes, with two overlapping circuits
Over-temperature protection: Yes on transformer, and MOSFETS
On/Off with status indicator: Yes, front mounted and easily accessible
Low battery cutout: 10 or 20 VDC, adjustable on most modules with the ME-RC remote
AC output and input: Hardwire
Output circuit breaker: 12 amp switchable
Input circuit breaker: 16 amps
Warranty: Two (2) years
Operating temperature: -20C to 60C (-4F to 140F)
Non-operation temperature: -40C to 70C (-40F to 158F)
Operating humidity: 0 to 95% RH non condensing
Mounting: Shelf (top or bottom up) or bulkhead (vents up)
Max operating altitude: 15,000' (4570m)
Construction: ABS plastic top and cast aluminum bottom
Dimension (HWD): 16.6" x 8.4" x 4.7" (420 x 210 x 120 mm)
Weight: 20 lb (9 kg)
Thank you for submitting your request.
Specifications & Documents
SCHNEIDER, CONEXT SW AC BRK KIT STACKED 120/240VAC RNW8651019, 120/240 VAC KIT FOR STACKING TWO SW INVERTERS
Radian Series GS Load Centers-175-AC-120/240
Go Power - 300 Watt Pure Sine Wave
GO Power Fuse Holder 300 AMP Class T
Radian Series GS Load Centers 175230
Magnum Energy - MS 4024-PAE 4000W 24V Pure Sine Wave Inverter 120/240VAC
Magnum Energy - MS 4448PAE 4400W 48V Parallel Inverter 60A PCF Charger 120/240V
Magnum Energy - MESSI Series Stacking Interface
Share your knowledge of this product.
Be the first to write a review »