Home > Electrical > E-Panels >

Midnite Solar E-Panel MNE125STMML Magnum E-Panel 125A Breaker Gray Steel
Midnite Solar E-Panel MNE125STMML Magnum E-Panel 125A Breaker Gray Steel

Our Price: $490.00

Product Code: MNE125STMML

Product Features Technical Specs Contact Us
White aluminum configured for 120 VAC in and out. This inverter features a true 120VAC input and output. This means your no longer need two inverters to fully utilize your 120 VAC generator. It also provides 120 VAC operation without the need for transformers or a second inverter.

The E-Panel also has a separate PV input terminal block that provides a place to tie in your PV input breaker, PV input and a PV lightning arrestor. There is also a terminal bus bar for the battery plus as well as as battery minus. No more need for ring terminals for these hook ups.

One of the best features of the MidNite E-Panel is the ability to complete much of the installation wiring right in the shop while the E-Panel is on the bench. You can connect your PV control breakers, lightning arrestors, battery status monitor, DC load circuits and AC load circuits prior to heading out the job site. This greatly reduces the chance of forgetting something a a location that is usually far away from the nearest store.

The inverter sports a 60 amp power factor corrected charger running at 80 kHz. This insures that virtually any generator made will be able to connect and charge from this (and all other) Magnum inverters/chargers. The 40 kHz invert swicthing speed and sampling rate is two times faster than the other popular off-grid inverter.

The MidNite Solar E-Panel comes standard with the basic over-current protection and disconnects required to install your renewable energy system. It can also expand to grow as your needs arise.

Small size compared to existing disconnect and over current solution
• Pre-wired to save time, money and complexity.
• All field wiring connections clearly labeled
• Easily expands to accommodate additional inverters
• Six slots for din rail breakers, PV, Wind, Hydro, AC distribution
• Bus bars for Battery Plus, Battery Minus and ground
• ETL listed to UL and Canadian standards

• DC Inverter battery breaker
• Internal inverter cables
• Pre-wired 50 amp 120 VAC rated Inverter AC bypass switch
• Pre-wired 50 amp 120 VAC rated AC Input disconnect
• 500 amp shunt
• AC terminal blocks
• Heavy duty 125 amp AC distribution block
• DC positive and and DC negative bus bars
• Terminal bus bars for 120 VAC input and output
• Din rails with 6 slots
• DC wiring cover
• Top shield
• Remote mounting hardware
• Wall mounting brackets
• Charge control bracket (CCB)
• Lots of hardware and grommets
• Knockouts for AC and DC conduits
• Cut outs for two GFCI outlets

Specifications & Documents

Share your knowledge of this product. Be the first to write a review »